Top 10 typical forklift accidents ， forklift procedure should take note of these matters ！.

Don't ignore the forklift at the workplace. If the procedure is not good, there will certainly be major mishaps in mins, and there are numerous mishaps including forklifts.

Case 1: The forklift cargo blocked the chauffeur's view, and the individual in front can not be located, causing a rolling crash.
Instance 2: In order to preserve the equilibrium of the forklift when raising hefty products, the workers utilized their body weight as the weight, which nearly caused casualties.
Case 3: The size of the forklift cargo surpasses the allowed size of the route and holds on the roadside rack, which nearly triggers an crash.
Situation 4: Forklift is speeding up and surrender throughout a turn.
Case 5: The forklift motorist did not discover the pedestrian, and the pedestrian did not observe the forklift.
Instance 6: The forklift lifts the workers illegally, the forklift driver does not wear the seat belt, the forklift lifter drops and the vehicle driver is crushed when the forklift rolls over.
Instance 7: The forklift motorist did not put on a seat belt and dropped from the lorry when it surrendered and was squashed.
Forklift procedure ought to focus on these issues ：.

Beginning.
1. Prior to beginning, observe the surroundings, and after verifying that there are no barriers that hinder the safety and security of driving, honk the horn first and then start.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge need to be safe before starting.
3. When the forklift starts with a tons, the motorist must initially confirm that the tons is secure and reputable.
4. The beginning has to be sluggish and steady.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground need to be maintained 300mm-400mm, and the mast should be tilted backward. .
2. Do not raise the fork too high when driving. When getting in and leaving the task website or while driving, take care that there will be no obstacles in the sky. When the load is traveling, the fork has to not be elevated too high, which will certainly impact the stability of the forklift. .
3. After unloading, the fork should be lowered to the normal driving placement before driving. .
4. When turning, if there are pedestrians or automobiles nearby, the driving signal needs to be released first. High-speed sharp turns are banned. High-speed sharp turns will certainly trigger the automobile to lose lateral stability and tip over. .
5. When the forklift is downhill, it is purely prohibited to shut off the fire and slide, and it is forbidden to brake unexpectedly while driving with loads unless there are special conditions.
6. When the forklift is running, it should follow the web traffic rules in the factory and must keep a specific safety and security range from the lorry in front. .
7. When the forklift is running, the load should be in the most affordable position that does not impede the driving, and the gantry ought to be correctly tilted back. The lots will not be elevated other than when stacking or packing. .
8. The height of the load must not obstruct the vehicle driver's sight. In special scenarios, when the thing impacts the forward vision, drive at a reduced rate when reversing.
9. It is restricted to activate the ramp, neither to drive across the ramp. .
10. The safe driving speed of the forklift in the factory area is 5 km/h, and it should drive securely at a reduced speed when getting in the production workshop area. .
11. When the forklift is lifted, lifted or driven, it is prohibited for workers to depend on the fork to hold products and play a stabilizing function. .
12. If problems are found, they will certainly be repaired and reported in a prompt manner, and they will never ever operate with illnesses or hide them.

packing and unloading.
1. When fork-loading things, the range in between both forks must be adjusted as needed to make the lots of both forks balanced and not manipulated, and one side of the product ought to protest the rack. .
2. It is forbidden to collaborate with a single fork or make use of a fork top or pull. In unique conditions, safety and security warning signs have to be set up to advise surrounding pedestrians. .
3. In the process of filling and unloading items, the forklift should be stopped with the brake. .
4. The rate of the vehicle need to be sluggish and steady. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled things and injure individuals. .
5. When making use of a fork to fork the goods, the fork needs to be as deep as feasible under the load, and it needs to be kept in mind that the fork suggestion must not touch various other goods or items. The lots ought to be maintained with minimal back tilt of the gantry to make sure that the load does not move in reverse. The mast can be tilted onward slightly when the tons is decreased to allow for easy positioning Electric Forklift Truck for Warehouse of the lots and extraction of the forks. .
6. It is prohibited to fork products at broadband and collide with difficult items with the fork head. .
7. When the forklift is Stand-on Electric Pallet Stacker functioning, it is forbidden for people to stand around the fork, so as to stay clear of the collapse of the goods and injure people. .
8. Overwhelming is banned, and it is prohibited to use forks to lift workers to take part in high-altitude procedures to stay clear of high-altitude falling accidents. .
9. It is not allowed to utilize the brake inertia to slide, place, round or roll items. .
10. It is not permitted to make use of forks to select, transform pallet unload.

Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Before leaving the forklift, you should dump the goods or reduced the fork structure.
2. Draw the hand brake handle to dead or depress the parking brake switch.
3. The engine is turned off and the power is removed. (Except for unique circumstances, such as the driver does not leave the vehicle's line of sight and does not exceed 1 minute).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance ought to be inspected, and fuel, lubricating oil and air conditioning water need to be included.
2. Inspect the security performance of starting, running and stopping.
3. Examine whether the lights and horn signals are total and efficient.
4. During the procedure of the forklift, examine whether the pressure and temperature are typical.
5. After the forklift is running, the external leak must likewise be checked and the seals should be changed in time.

Forklift Safety Operation Specifications.
1. You should check prior to leaving the auto;.
2. When you run into somebody in front of you throughout driving, you must send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the nadir of the cargo should be 0.3 m ~ 0.4 m in the air;.
5. The turning should not be also sharp to avoid the propensity of " complimentary turning";.
6. Adding and down the slope needs to be sluggish and uniform, and no activating the slope is allowed.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the vehicle must be driven backwards when declining;.
8. When the forklift personnel lug the goods and move forward, if they come across large or hefty goods and most likely to the driver's line of vision, they should take the reversing workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for far away driving.
3. It is not permitted to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to pick up the goods.
6. It is not enabled to utilize stopping force to exile round or easy-to-roll items.
7. It is not allowed to bring people to work with the pallet or fork, and it is purely forbidden to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Vehicle parking is not permitted under the following problems.
1. Contours, slim roadways, railway crossings;.
2. Sections with a longitudinal slope above 5%.
3. When there is an barrier on one side of the roadway, the contrary side of the section with the same length as the challenge must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844